The 7.5kW Amerec AK7.5 home steam shower generator is engineered for residential and day spa steam baths up to 200 adjusted cubic feet (ACF).The Amerec AK7.5 is engineered for home and day spa steam baths up to 200 adjusted cubic feet (ACF).
Features
Sequential temperature control for consistent flowStainless steel tankIndustrial grade, serviceable heating elementsDurable electronic componentsElectronic water-level control systemLow voltage safety control circuitsAvailable Auto Drain automatic draining systemAbility to field wire for 1-phase or 3-phase phaseAbility to connect multiple generators to heat steam baths larger than 550 cubic feetOperates with inside/outside shower, on/off, time/temperature controlsFull 3/4" port drain valveASME safety valveUL/CSA/CE listedIncludes
7.5KW steam bath generatorInstallation and operation manualLimited warrantySpecifications
Model |
AK7.5 |
Minimum Adjusted Cubic Feet |
80 |
Maximum Adjusted Cubic Feet |
200 |
Kilowatt Rating (KW) |
7.5 KW |
Shipping Weight (Lbs.) |
35 lbs |
AC Voltage |
240V AC |
DC Voltage |
5V DC |
Phase |
Single Phase |
Nominal Amperage |
31 Amps |
Recommended Protective Device |
40 Amp |
Recommended Minimum Copper Wire Supply |
8 AWG |
Water Supply Connection |
3/8" NPT |
Generator Steam Line Connection |
1/2" NPT |
Steam Head Connection |
1/2" NPT |
Drain Connection |
3/4" NPT |
Safety Relief Valve Connection |
3/4" NPT |
Safety Relief Valve PSIG |
10 PSIG |
Control "Rough In" Cut Out |
2-3/8" Diameter |
Control Sensor Cable |
25', 2 Conductor, 22 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out |
7/8" Diameter |
Generator Control Connection |
8 Pin, Snap-In Connector |
Generator Control Cable |
25', 8 Conductor, 28 AWG, Shielded Cable |
Width In Inches |
16-1/2" |
Depth In Inches |
6-1/4" |
Height In Inches |
15" |