The Amerec AK18 is an 18kW home steam shower generator engineered for residential and day spa steam baths up to 700 adjusted cubic feet (ACF). The Amerec AK18 is made up of dual generators in tandem (two 9kW generators).The Amerec AK18 is engineered for home and day spa steam baths up to 700 adjusted cubic feet (ACF).
Features
Sequential temperature control for consistent flow
Stainless steel tank
Industrial grade, serviceable heating elements
Durable electronic components
Electronic water-level control system
Low voltage safety control circuits
Available Auto Drain automatic draining system
Ability to field wire in 1-phase or 3-phase
Ability to connect multiple generators to heat steam baths larger than 700 cubic feet
Operates with inside/outside shower, on/off, time/temperature controls
Full 3/4" port drain valve
ASME safety valve
UL/CSA/CE listedIncludes
18kW steam bath generator; two 9kw steam generators
Gang cable
Note: Does not include additional steam head. First steam head comes with Control package.
Installation and operation manual
Limited warrantySpecifications
| Model |
AK18 |
| Minimum Adjusted Cubic Feet |
500 |
| Maximum Adjusted Cubic Feet |
700 |
| Kilowatt Rating (KW) |
18kW |
| Shipping Weight (Lbs.) |
70 lbs |
| AC Voltage |
240V AC |
| DC Voltage |
5V DC |
| Phase |
Single Phase |
| Water Supply Connection |
(2) 3/8" NPT |
| Generator Steam Line Connection |
(2) 1/2" NPT |
| Steam Head Connection |
(2) 1/2" NPT |
| Drain Connection |
(2) 3/4" NPT |
| Safety Relief Valve Connection |
(2) 3/4" NPT |
| Safety Relief Valve PSIG |
(2) 10 PSIG |
| Control "Rough In" Cut Out |
2-3/8" Diameter |
| Control Sensor Cable |
25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out |
7/8" Diameter |
| Generator Control Connection |
8 Pin, Snap-In Connector |
| Generator Control Cable |
25', 8 Conductor, 28 AWG, Shielded Cable |
| Width In Inches |
(2) 16-1/2" |
| Depth In Inches |
(2) 6-1/4" |
| Height In Inches |
(2) 15" |
